VERINLEGNO · MADE IN ITALY

Water-Based Interior

Interior water-based white primers, topcoats, clear sealers and self-sealers for furniture, doors and joinery.

Interior finishing

White & clear systems

Water-based coating

ITALIAN WOOD COATINGS

View products

01 / PRODUCT COMPARISON

Four interior coatings. One clear range.

PRODUCT CODE	Product	FADENEX listed packs	Dilution
WAA0SA ↗	White Water-Based Primer	WAA0SA.25 · 25 kgWAA4SA.05 · 5 kg	Not specified
WAD015SA ↗	White Water-Based Topcoat G15	WAD015SA.25 · 25 kgWAD415SA.05 · 5 kg	Deionised water · 0–5%
WAC0SA ↗	Clear Water-Based Sealer	WAC4SA.05 · 5 kg	Deionised water · 0–5%
WAL010SA ↗	Clear Water-Based Self-Sealer G10	WAL410SA.05 · 5 kg	Deionised water · 0–5%

02 / WATER-BASED INTERIOR

Four coatings. Full specifications.

VERINLEGNO / WATER-BASED INTERIOR

WAA0SAWhite Water-Based Primer

COMMERCIAL NAME IDROFOND 6771 BIANCO INT

A white water-based primer for interior woodwork, MDF, doors, frames and flat joinery surfaces. Designed as a preparatory sealer before a compatible finishing coat.

FADENEX listed packsWAA0SA.25 · 25 kg / WAA4SA.05 · 5 kg

DilutionNot specified

Technical specifications

Manufacturer TDS code	WAA0SA
Product description	Water-based white sealer, interior
FADENEX listed pack codes	WAA0SA.25 · 25 kg / WAA4SA.05 · 5 kg
Suggested surfaces	Flat panels, frames, baseboards, doors
Application methods	Spray · airless · airmix
Application quantity	150–250 g/m²
Dilution	Not specified
Viscosity	15 ± 2 s · DIN 8
Solid content	56 ± 3%
Specific weight	1.365 ± 0.030 kg/L

Dust-free at 20°C	30 min
Touch-free at 20°C	2 h
Sandable at 20°C	4 h
Recoat at 20°C	6 h
Stackable at 20°C	12 h
Shelf life	15 months
Storage	Above 5°C and below 35°C
TDS issue date	06/11/2025
Application guidance	For raw MDF: three coats, sanding between coats with P240–P400 abrasives.

Product documents WAA0SA

View TDSPDF View SDSPDF

VERINLEGNO / WATER-BASED INTERIOR

WAD015SAWhite Water-Based Topcoat G15

COMMERCIAL NAME CONVERTER IDRO BIANCO INT 15 GL

A single-component white water-based converter for interior furniture finishing, used over a suitable water-based sealer. Manufacturer describes it as tintable with its R900-series water-based pigment pastes.

FADENEX listed packsWAD015SA.25 · 25 kg / WAD415SA.05 · 5 kg

DilutionDeionised water · 0–5%

Technical specifications

Manufacturer TDS code	WAD015SA
Manufacturer product type	Monocomponent white water-based converter
FADENEX listed pack codes	WAD015SA.25 · 25 kg / WAD415SA.05 · 5 kg
Gloss	15 ± 3 gloss units
Application quantity	120–140 g/m²
Application method	Spray gun · airless · airmix
Dilution	Deionised water · 0–5%
Solids content	36 ± 3%
Specific weight	1.020 ± 0.020 kg/L
Pigmentation	Up to 15% R900-series paste; application example 5–6%

Dust-free at 20°C	30 min
Touch-free at 20°C	1 h
Sandable at 20°C	Not specified
Recoat at 20°C	12 h
Stackable at 20°C	24 h
Shelf life	12 months
Storage	Above 5°C and below 35°C
TDS issue date	04/12/2025
Application guidance	Two coats of suitable water-based primer (WAA0SA suggested), sand, then approximately 130 g/m² of topcoat; worked example uses 5–6% R900 pigments.

Product documents WAD015SA

View TDSPDF View SDSPDF

VERINLEGNO / WATER-BASED INTERIOR

WAC0SAClear Water-Based Sealer

COMMERCIAL NAME IDROFOND 6776 TX INT

A transparent, single-component interior sealer intended to retain the natural wood appearance. The manufacturer recommends it for both softwoods and hardwoods.

FADENEX listed packsWAC4SA.05 · 5 kg

DilutionDeionised water · 0–5%

Technical specifications

Manufacturer TDS code	WAC0SA
Listed stock code	WAC4SA.05
FADENEX listed pack codes	WAC4SA.05 · 5 kg
Product type	Monocomponent clear interior sealer
Application method	Spray
Application quantity	100–200 g/m²
Dilution	Deionised water · 0–5%
Viscosity	15,000 ± 4,000 cps · Brookfield SP4, rpm 5
Solids content	31 ± 2%
Specific weight	1.030 ± 0.030 kg/L

Dust-free at 20°C	30 min
Touch-free at 20°C	1 h
Sandable at 20°C	4 h
Recoat at 20°C	6 h
Stackable at 20°C	24 h
Shelf life	12 months
Storage	Above 5°C and below 35°C
TDS issue date	04/12/2025
Application guidance	Spray 100–200 g/m², with up to 5% deionised water if needed; sand P240–P320 before recoating. A third coat may increase filling.

Product documents WAC0SA

View TDSPDF View SDSPDF

VERINLEGNO / WATER-BASED INTERIOR

WAL010SAClear Water-Based Self-Sealer G10

COMMERCIAL NAME FO FI IDRO TX 6786 INT 10 GLOSS

A transparent, single-component interior coating that can be used as both the sealing and finish coats. A soft low-gloss look for interior furniture and furnishings.

FADENEX listed packsWAL410SA.05 · 5 kg

DilutionDeionised water · 0–5%

Technical specifications

Manufacturer TDS code	WAL010SA
Listed stock code	WAL410SA.05
FADENEX listed pack codes	WAL410SA.05 · 5 kg
Product type	Transparent self-sealing interior coating
Gloss	10 ± 2 gloss units
Application quantity	80–140 g/m²
Application methods	Spray · airmix · airless · electrostatic
Dilution	Deionised water · 0–5%
Solids content	26 ± 3%
Specific weight	1.050 ± 0.020 kg/L

Dust-free at 20°C	30 min
Touch-free at 20°C	1 h
Sandable at 20°C	4 h
Recoat at 20°C	6 h
Stackable at 20°C	24 h
Shelf life	12 months
Storage	Above 5°C and below 35°C
TDS issue date	04/12/2025
Application guidance	Spray 80–140 g/m², optionally with up to 5% deionised water; after 4 hours sand P400 and apply the second coat.

Product documents WAL010SA

View TDSPDF View SDSPDF

Products

Available categories

Coming soon

Water-Based Interior

Four interior coatings. One clear range.

Four coatings. Full specifications.

WAA0SAWhite Water-Based Primer

WAD015SAWhite Water-Based Topcoat G15

WAC0SAClear Water-Based Sealer

WAL010SAClear Water-Based Self-Sealer G10

Get in touch.

Send an inquiry

FADENEX · Riyadh